Belvedere Resources | Gold results from resource delineation drilling at Kopsa, Finland

• Home
• News
• Investors
• Corporate
• Operations
• Contact Us

Please enter a search term to begin your search.

• 2012
• 2011
• 2010
• 2009
• 2008
• 2007
• 2006

Gold results from resource delineation drilling at Kopsa, Finland

Posted on 1323070560

December 5^th, 2011                                                         Exchange: TSX V Symbol: BEL

Gold results from resource delineation drilling at Kopsa, Finland

Vancouver, British Columbia, December 5^th, 2011. Belvedere Resources Ltd. BEL:TSX-V (“Belvedere”) is pleased to announce new results from a 4,300m programme of resource delineation drilling at its 100% owned Kopsa gold project. The Kopsa gold, copper project is being evaluated as an open pit satellite mining operation to be processed at the Hitura Nickel mine and mill, which lies only 15 km away.

Highlights

• New hanging wall zone identified in BelKopDD 82 - 12.74 m @ 2.79 g/t Au,  0.08% Cu
• Infill results in the high-grade part of the main zone continue to deliver good results e.g.
• 20.3 m @ 4.61 g/t Au 0.36% Cu (BelKopDD 65)
• 23.3 m @ 2.51 g/t Au 0.28% Cu (BelKopDD 72)
  • Further drilling extends the main zone resource downdip and along strike e.g.
  • 43.68 m @ 1.03 g/t Au, 0.09% Cu (BelKopDD 80)
  • 22.64 m @ 1.85 g/t Au, 0.10% Cu (BelKopDD 83)

David Pym (CEO) comments “ This phase of drilling is now complete and should be of sufficient density to allow an NI 43-101 compliant resource to be calculated for the central part of the main zone at Kopsa. This in conjunction with the upcoming detailed metallurgical studies will form the basis for a scoping study to be completed in Q1 2012, on the feasibility of mining the Kopsa gold copper deposit …”

The recent drill programme consisted of 4,320 metres over 44 holes, and is focused on, shallow near surface mineralisation in the main zone. Mineralisation in the Main Zone occurs largely between surface and 100m vertical, has a true thickness between 20 and 70m and dips shallowly to the south. It has now been delineated over a strike length of 600 metres, and remains open in all directions. Further mineralised zones have been intersected to the north and south of the Main Zone, and remain targets for future follow-up drilling.

Table 1: Intersections using a 0.5 g/t Au cut-off with a grade thickness greater than 3 gram meters. No top cut is applied. Maximum grade is 22.0g/t Au over 1.08m, one of five individual samples over 15 g/t Au (0.5 oz/t). Intersections are estimated to be 85 - 100% of true width.

The drilling was undertaken by Drillcon SMOY of Finland, providing 42 mm diameter core. Samples are comprised of half diamond core. Intersections are estimated to be 85% - 100% of true width.  No top cuts are applied with the highest individual assay being 22.0 g/t gold over 1.08 metres. Core samples are sawn in half on site, prepped and assayed by 30g fire assay with an AAS finish at the internationally accredited laboratories of ALS Chemex in Finland. The quality assurance-quality control (QAQC) program of Belvedere consists of the insertion of certified standards of known gold content every 20 samples, with blanks at the beginning of each batch. In addition, ALS Chemex inserts a number of blanks and standards into the analytical process. Standards, blanks and duplicates make up approximately 15% of the samples assayed. The remaining half core is retained on site for verification and reference purposes. The locations of the drillholes are provided in the table below.

Forward Looking Statement:

Some of the statements contained herein may be forward-looking statement, which involve known and unknown risks

and uncertainties. Without limitation, statements regarding future plans and objectives of the Company (including statements relating to future resource and production targets) are forward looking statements that involve various degrees of risk. It is important to note that the Company’s actual results could differ materially from those in such forward-looking statements.

The technical aspects of this statement have been prepared under the supervision of Pekka Lovén (MSc), who is acting as an Independent Qualified Person in compliance with National Instrument 43-101 with respect to this release. The data supporting this news release has been provided in a Surpac database and has been verified against the original laboratory assay certificates. The Qualified Person has not undertaken any independent sampling of the drill core. 

BELVEDERE RESOURCES LTD.

David Pym, CEO; Suite #404, Vancouver World Trade Centre, 999 Canada Place, Vancouver. BC. V6C 3E2, Canada

For further information, please contact David Pym (CEO) or Toby Strauss (COO) at +1-604-844-2838 or visit www.belvedere-resources.com

Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of the contents of this release.